Every windshield we replace undergoes a rigorous 14-Point Checklist, so you can be assured of a thorough job performed at the highest standards.

1. Completed vehicle inspection prior to installation
   
   
2. Used care to prevent damage and maintain vehicle cleanliness by placing protective covering on/in vehicle as required
   
   
3. Removed moldings, clips, windshield wipers, cowling, etc., as required
   
   
4. Used Full Cut-Out method, removing old adhesive to approximately 1/16" thickness as specified by the original equipment manufacturer (OEM)
   
   
5. Used proper high performance urethane adhesive to meet the specifications of your car's manufacturer and safe drive-away time requirements
   
   
6. Installed windshield that meets or exceeds the OEM specifications of your car's manufacturer
   
   
7. Installed moldings, clips, windshield wipers, cowling, etc., replacing with new parts as necessary
   
   
8. Tested wipers to insure proper positioning
   
   
9. Tested all connections affected by the installation (washer hose, antenna, heating elements, etc.)
   
   
10. Vacuumed glass and debris from vehicle
    
    
11. Performed final vehicle inspection, including cleaning of glass.
    
    
12. Reviewed safe drive-away time recommendation based on the type of urethane applied and environmental conditions (temperature and humidity)
    
    
13. Reviewed warranty information and care instructions
    
    
14. Reviewed GTA Autoglass windshield repair process

Home | Safety | Guarantee | Mobile Service | Inspection | Rewards | Ask for a Quote | Contact